DIY Glow In The Dark Easter Eggs

4:33 AM Unknown 0 Comments



Hello everybody. Today, I found an awesome DIY. It's a DIY Glow In The Dark Easter eggs. Making it is simple. I found 2 ways to make it. For the first one, you need Easter eggs, braclet glow sticks, candy and tape. About the Easter eggs, it must be the plastic ones that open. For the glow sticks, it must be the color based on the Easter egg. about the tape, the color is optional, but I prefer colorless tape. First, open the Easter eggs. Next, activate your glow sticks by breaking and shaking it. Then, place your glow sticks and candy into the Easter egg and finally, tape your Easter egg at the line in the middle and you made your very own DIY Glow In The Dark Easter Eggs. That is only 1 way. If you wanted with out candy and putting glow sticks, this method can do just that. For this method, you need and Easter egg, water- based acrylic varnish, cup, glow in the dark powder, craft brush and a black light. First, put 8 oz of water- based acrylic varnish into the cup and also add 2 oz of glow in the dark powder into the same cup. Then, mix well. Once you have done that, paint the mixture on the eggs using a craft brush. After that, let it dry. Finally, place all the eggs under the black light for 10 minutes. After 10 minutes, the eggs will be glowing because the glowing powder is fully charged and you made your very own DIY Glow In The Dark Easter Eggs.     














0 comments:

Glow Sticks Balloons

10:18 AM Unknown 0 Comments


Hello everybody. Today, I found an awesome DIY. It's a DIY Glow Stick Balloons. My dad freaked out. He said, " You have 2 days to make this balloon" and I finished making Glow Stick Balloons in 10 minutes. Making it is easy. I didn't had to buy anything. You need balloons, glow sticks and a air pumper. For the balloons, you can use any color. For the glow sticks, use a color based on the balloon. You could use the big glow stick, or the bracelet glow stick. First, activate the glow stick by breaking and shaking it. Next, fill half your balloon with air. Once you have done that, quickly throw your glow stick into the balloon. If you are using the bracelet glow stick, then throw 2. If you are using the big glow stick, then 1 is enough but 2 is optional. Then, fill the rest of the balloon with air. Finally, tie a knot and you made you very own DIY Glow Stick Balloon.   












0 comments:

DIY Rainbow Fan

6:01 AM Unknown 0 Comments




















I found this awesome DIY idea. It's a DIY Rainbow Fan. I found 2 ways of making it. 1 way is painting the blades and another way is taping glow stick on the blades. This idea could be used for multiple things. To make the first way, you need a fan, brushes, and acrylic paint. Choose which colors you will use. After that, paint the blades. Paint one blade one color. Once you have painted all you blades, let the paint dry and you made your very own DIY Rainbow Fan. That is the first way. When i turned on my fan, I didn't see the rainbow as I was supposed to. I saw the blur of colors. That's why I found another way of making it. This way is easier. You need a fan, big glow sticks, scissors and tape. For the glow sticks, bring different colors or it won't be so rainbow looking. Activate the glow sticks and you can put how many glow sticks you want. Tape it on the fan. Close the lights and you made another DIY Rainbow Fan.  







0 comments:

DIY Galaxy Jar

2:03 AM Unknown 0 Comments










I found an awesome DIY. It's a DIY Galaxy Jar. You can use use this as decorations, parties, gifts, etc. Making it is easy. You need a Mason jar, acrylic paints, cotton, silver glitter, holo stars, wood stick, containers and water. The colors for acrylic paints are Pink, purple, dark blue and light blue. First take 4 cups and fill them with water. Now, add the acrylic paints in the water. Use the wood stick to mix it shown on the picture above. In your mind, divide your jar into 4. Add cotton to the first quarter and put silver glitter and holo stars. Choose any color and pour it into the jar. The level must be as same as the cotton. If you put too much paint, add more cotton. Repeat the process 3 times and you made your very own DIY galaxy jar.

0 comments:

DIY Hologram Projector

2:05 AM Unknown 0 Comments



Hello everybody. Today, I found an awesome DIY. It's a DIY Hologram Projector. My mom is not even watching TV because she's staring at the projector. The things you need are cheap. You need graph paper, CD case, tape, pen, scissors, smartphone and a knife. First, draw a trapezium using a graph paper. The shape should measure roughly 6cm wide at the bottom and 1cm at the top by 3.5cm high. Then, cut the trapezium using scissors. Once you have done that, break off the edges of the CD case. Use the trapezium to mark out the shape on the CD case. Mark it using a pen. Do it 3 more times. in total, there should be 4 trapeziums drawn on the CD case. Carefully, cut the trapeziums with your knife. After that, stick the trapeziums together with some tape shown on the picture above and you made your very own DIY Hologram Projector. Take your Projector and place it on your smart phone. Load up a Hologram specific video. Turn off the lights and you're good to go.    

0 comments:

Edible Water Bottle

5:49 AM Unknown 0 Comments



Edible water bottle is awesome. You will not be thirsty for a long time. You can make your own DIY Edible Water Bottle. It saves a lot of plastic. making it is a little tricky, but it's totally worth it. You need sodium Alginate, sodium Lactate, bowl, hand blender, water and cups.The first thing you need to do is get a cup of water and put 1g of sodium Alginate into the cup of water. Pour it into a bowl. Once you have done that, use a hand blender to dissolve the sodium Alginate. Once you have dissolved it, you will see bubbles. Wait for the bubbles to  vanish. Instead of waiting, move on to the next step. Bring a bowl and add 4 cups of water into it. Once you have done that, add 5g of sodium Lactate into the bowl. After that, take a deep spoonful of sodium Alginate, carefully plop it into the sodium Lactate. Stir gently for a few minutes and you made your very own DIY Edible Water Bottle.

0 comments:

DIY Glowing Jar

10:19 AM Unknown 0 Comments

                                           































I’m never going use my light bulb again and I will never gonna pay the bill for light ever again. A DIY glowing jar can do just that. 2-3 of these glowing jars can light up a room and it’s cheap. The things you are going to need are a jar with a lid, a knife and a big glow sticks. A small glow sticks won’t do, you need a big one shown on the image above. If your jar is small, then go ahead and take the small ones. One glow stick is enough for a jar. First, you need to activate your glow stick by breaking and shaking it. Then, you need to cut the glow stick. While you’re cutting it, don’t allow the glowing liquid to pass trough and don’t cut it at the middle. Instead, cut it on one of the sides. The glowing liquid is radioactive so caution must be taken and don’t get it on your skin. The big glow stick is tough so it will take time to cut it. Once you have cut the glow stick, pour the glowing liquid into the jar. Once again, don’t allow the liquid on your or anybody’s skin. Close the lid and lights and you got your very own DIY glowing jar. You can also put silver glitter in the glowing jar, close the lid and shake it and the jar will be sparkling. It will also glow not only at the bottom of the jar, but the whole jar.  











0 comments:

Subscribe to: Posts (Atom)